top of page
daltonairandheatus

How to DIY AC Installations? Steps

Summer is coming, which means warm weather, barbecues, and maybe a little bit of extra work on your electrical system. If you're like most homeowners, you've probably been considering an AC installation this season. But where do you start? This guide will walk you through the basics of how to DIY an AC installation.

If you're like most homeowners, your home is likely heated by a central AC unit. Installing a central AC unit is a relatively easy task, but there are a few things you need to know before you start.



Here are the steps:

1. Estimate the size of the unit and the location where it will be installed.

2. Summon an experienced contractor. A poorly installed AC unit can cause major problems in your home, and you don't want to take any chances.

3. Get the permit from your local building department. Permits generally cost around $60-$100, but they're worth the peace of mind they provide.

4. Install the unit according to the manufacturer's instructions or those provided by your contractor. Be sure to read and follow all safety warnings before beginning work.

When it comes to cooling your home in the summertime, there are few things as satisfying as opening up the windows and letting in a blast of cool air. Unfortunately, when the temperatures outside start to rise, your home can quickly become unbearable. That’s where an air conditioning installation comes in handy. Whether you’re looking to replace an old unit or install a portable AC unit for temporary relief, following these simple steps will help you get the job done right.

1. Decide what type of AC system you need: central or portable. Central AC systems require a dedicated electrical outlet and are usually more expensive than portable AC units. Portable AC units, on the other hand, can be plugged into any standard wall outlet, making them ideal for use in smaller spaces or when you need to move the unit between rooms.

2. Figure out how much air conditioning you need: If you have an existing central AC system, figure out how much BTU’s (British Thermal Units) of cooling power your unit needs per hour. Portable AC units are typically rated in CFM (Cubic Feet Per Minute), which is the amount of air that the unit can move in one minute. To find out how many BTU’s your unit needs to cool a room, divide the square footage of the room by the number of vents on the unit.

3. Find an installer: If you want to install a portable AC unit yourself, be sure to find an experienced installer. Unlicensed contractors may not have the necessary tools or knowledge to complete the installation safely.

4. Buy or rent the necessary tools: You’ll need a power drill, saw, screws, and possibly a level.

5. Figure out where you’re going to install the AC unit: Choose a well-ventilated area that is free from obstacles, like cabinets or furniture. Make sure the unit will fit in the space without obstructing any doors or windows.

6. Mark and cut the hole in your wall: Use a level to make sure the hole is straight before drilling through it. Once you have drilled through the wall, use screws and anchors to secure the AC unit to the wall.

7. Connect the AC unit to your home’s electrical system: Connect the electrical cables from the AC unit to your home’s electrical panel. Make sure you connect the right wires to the right connectors.

8. Turn on the AC unit and test it out: Once the AC unit is plugged in and turned on, check to see if the room is cool enough. If not, adjust the settings until the room is cool enough.



AC installations are typically quite simple tasks for the average homeowner, but there are a few things to keep in mind when working on ac repair Pearland: always use proper safety measures when handling power tools; use a voltmeter to test circuits before plugging or unplugging anything; use common sense when making decisions about where to drill or cut; and be very careful not to damage walls or ceilings during installation.

2 views0 comments

Comments


bottom of page